Edirol V-44SW E1 Manuel d'utilisateur télécharger pdf (Page 47)

Using the V-44SW with Other Devices

■

Controlling the V-44SW from a PR-80/50

You can control the V-44SW remotely from an Edirol PR-80 or

PR-50 (hereafter referred to as PR Series devices) via MIDI.

The following operations can be controlled from the PR Series

device.

●

You can use the PR Series Scheduler function for

automatic operation of the V-44SW.

●

You can use the PR Series Scheduler for automatic

operation of the V-44SW.

●

Connect the video output from the PR Series device to one of the

SD S-VIDEO connectors 1–4 or SD COMPOSITE connectors 1–

●

For instructions on setting and operation of the PR series device,

refer to the PR Series device Owner’s Manual.

■

Transmitting Settings to Another

V-44SW (Bulk Dump)

You can transmit one V-44SW’s parameter settings to another

V-44SW as MIDI data

Connect the MIDI OUT/THRU connector of the V-44SW

transmitting the settings to the MIDI IN connector of the

V-44SW receiving the settings.

About the Receiving V-44SW

●

When MIDI data is received, the settings on the receiving device

are overwritten, and the previous settings are lost. If you want to

save your settings, back up the V-44SW’s settings to a computer.

☞

“Backing Up the V-44SW’s Settings to a Computer” (p. 49).

●

When using the V-44SW while linked with the V-440HD, the

settings of the V-440HD can be transmitted to the V-44SW. In this

case, the V-44SW’s operational mode needs to be switched to

“V-440HD Slave Mode” (p. 44).

If MIDI data is received from the V-440HD without switching the

operational mode, the panel preset functionality (p. 42) of the

V-44SW may fail to operate properly.

●

Before beginning the bulk dump, be sure the Device ID setting is

the same for both the transmitting and receiving device.

Set the Device ID with “6: Device ID” under “9. MIDI Setup” in the

menu.

Press the [MENU] button to display the Main menu.

Select “9. MIDI Setup” and then select “18: MIDI Bulk

Dump” from the sub-menu.

Select “Yes.”

Press the [ENTER] button.

The MIDI data is transmitted from the transmitting V-44SW.

Connection Example

Use a PR Series device running ver. 1.2 or later.

Composite or S-Video

MIDI

USB MIDI Interface

(

UM-1EX etc.)

V-44SW Rear Panel

PR-80/50

RGB Video

SD Video

HD Video

Making the Connections

Procedure

MIDI OUT/THRU

MIDI IN

Transmitting V-44SW

Receiving V-44SW

V-44SW Rear Panel

V-44SW_e.book 47 ページ２００６年１０月２３日　月曜日　午後３時２５分

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 71 72

Commentaires sur ces manuels

Pas de commentaire

Edirol V-44SW E1 Manuel d'utilisateur Page 47

Commentaires sur ces manuels