Edirol SD-80 Manuel d'utilisateur télécharger pdf (Page 26)

Using the internal sound generator

Selecting a sound

If the part type is Inst, use the following procedure to select a sound. First make sure that the part type is

Inst. For details on how to set the part type to Inst, refer to "Selecting the type of part (INST/DRUM)" (p.

24).

On the SD-80, the sound of an Inst part is specified by two numbers: an Instrument number and a

Variation number. There are 128 sounds whose variation number is 000, and these make up the basic

sounds of the SD-80. These are referred to as “capital sounds.”

By changing the MIDI bank number of these sounds, you can select variations that have a different tonal

character. These are called “variation sounds.” For details on the various sounds that can be selected,

refer to "Instrument list (GM2 / Native mode)" (p. 95).

fig.5-06

1. Press [INST].

The button will light.

fig.5-06a_67.2

2. Press [PAGE ] until the display indicates Inst

Number.

3. Turn the [VALUE] dial to select a capital sound.

The sound name and Inst Number shown in the display will also change.

4. Press [PAGE ] until Variation appears.

In GS mode, this will be displayed with Bank.

5. Turn the [VALUE] dial to select a variation sound.

The sound name and Inst Number shown in the display will also change.

6. Press [INST] once again to return to the main screen.

1,6

2,43,5

Convenient functions

You can also use the following method to select a sound.

After step 1, if you turn the [VALUE] dial, any sound in the current sound set can be selected.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 131 132

Pas de commentaire

Edirol SD-80 Manuel d'utilisateur Page 26